Resin is a common material for large and small statues. It is easy to cast and durable enough to use for outdoor ornaments. Unfortunately, accidents happen and your resin might become cracked, scratched or broken altogether. If this happens, you tin use two methods to repair the statue depending on the extent of the impairment. Two-part epoxy glue will aid you repair the statue, but it's of import to purchase epoxy that is suitable for outdoor use if your statue unremarkably sits in your garden.

Put on the disposable gloves and refer to the epoxy instructions.

Mix the epoxy according to the instructions in the beaker or plastic cup. Use the syringes to accurately measure the resin and the hardener.

  • Resin is a common material for big and small-scale statues.
  • Use the syringes to accurately mensurate out the resin and the hardener.

Stir the epoxy thoroughly using the wooden spatula then apply it to the resin statue immediately before it starts to ready.

Use the spatula to paste over cracks. To stick pieces of the statue back together, employ the epoxy to the statue and stick the broken slice back on. Wipe away excess epoxy using a dry out cloth, or await until the epoxy has dried and use a sparse file to remove any unsightly backlog.

  • Stir the epoxy thoroughly using the wooden spatula and then apply it to the resin statue immediately before information technology starts to set.
  • To stick pieces of the statue back together, employ the epoxy to the statue and stick the broken piece back on.

Concord the piece in place until the epoxy starts to harden, or use masking tape to secure the ii pieces together. Refer to the manufacturer's instructions to find out how long this will take.

Attach a drill head to the drill that matches the size of your threaded pipe. Drill a pigsty in the centre of the cleaved area on both the statue and the broken part, ensuring the holes match upward so the part won't sit at an odd bending when you reattach it.

Attach a smaller drill head to your drill and create smaller holes effectually the eye hole on the main statue and the broken part. Drill the holes in different directions, as this will help the epoxy stick.

Cut the correct length of threaded pipe to fit in the two heart holes. You want the length of the pipe to be smaller than the ii drilled holes, but it should extend out of the statue and exist able to back up the broken piece.

Mix the epoxy according to instructions. Utilise it to both the statue and the cleaved part, ensuring that the epoxy fills the smaller drilled holes. Printing the two parts firmly together and refer to the epoxy manufacturer'southward instructions for advice on the drying time.

  • Attach a smaller drill head to your drill and create smaller holes around the centre hole on the primary statue and the broken office.
  • Printing the ii parts firmly together and refer to the epoxy manufacturer'due south instructions for advice on the drying fourth dimension.

Remove backlog epoxy using a piece of sandpaper or a file once it has hardened. If you demand to repaint the area to match the rest of the statue, yous can do and so one time the resin has prepare fully.

Use epoxy glue in a well-ventilated surface area.