How To Remove Kwikset Deadbolt With Security Screws

1 day one of my friends asked me – "Matthew, exercise you know how to remove a Kwikset deadbolt?" He knows that I have all-encompassing experience in the home security field, and I always go amazed by how technology and small hacks may drastically improve a abode's overall security.

He has a Kwikset deadbolt lock at his habitation and wanted to learn how he can remove it if the need arises. While having the conversation, I learned that my concluding commodity on how to remove the Schlage deadbolt helped one of his neighbors.

In my opinion, locks play a significant role in our lives, equally it helps in keeping our family unit and business firm safe. At times, when yous have to get out for a day or two, you lot ever fear burglary from behind.

The answer to all your vulnerable thoughts is installing a higher-class ANSI lock. And Kwikset is a good brand you can go with.

Nevertheless the caveat with these good brands is that when you take to remove them, it is dull. After all that's what they are intended to practise.

Now, permit'due south circle back to my friend's question on how to remove a Kwikset deadbolt.

How To Remove A Kwikset Deadbolt In five Different Situations

How To Remove A Kwikset Deadbolt

When yous have a Kwikset deadbolt guarding your door, y'all know you are safe. However there are times when you may have to remove the lock. Some of the situations are –

• The lock cylinder has worn out
• You want to movement to a different lock
• Y'all desire to put smart locks on your door.

Now permit's motility on to the actual steps about how to remove the lock. With but a few essential tools, Kwikset deadbolts may be removed. Then you may rekey the lock or replace it with one that better fits your requirements.

Things Yous Volition Need

1) A apartment head screwdriver

2) A Phillips screwdriver

3) A small-scale bowl

4) A box to hold the parts of your lockset

five) A .05 Allen wrench

Step past footstep Instructions

i) Using a tiny flat-blade screwdriver, pry the inside deadbolt cover off.

2) At present, remove the pollex latch handle from your Kwikset deadbolt lockset'south interior.

There are many ways to remove the latch handle on Kwikset deadbolt locksets; they are as below:-

• On some versions, a plastic pin on the latch handle's shaft must be removed with a tiny pair of needle-nose pliers.
• To remove the latch handle on some Kwikset deadbolt locksets, a tiny metal pin must be depressed.
• On the latch handle, you could locate a little set screw. In most circumstances, a.05 Allen wrench is required to tighten this set screw.

To go on the pollex latch and the pivot safe, identify them in your minor container.

three) Now, examine the rose plate on your Kwikset deadbolt lockset to run into if it conceals the mounting screws. Now, carefully peel the rose plate away from the door with the flathead screwdriver from a little cut-out on the edge of the rose plate.

4) Yous will now meet the two mounting screws, remove them from the Kwikset deadbolt lockset using the Phillips screwdriver, and put them bated safely.

five) Now, the mounting hardware is gratuitous from both parts of your Kwikset deadbolt lockset. Pull out the inner and outer components of the Kwikset lockset with caution.

6) Now, remove the latch mechanism from the border of the door past unscrewing the two Philips screws that hold the latch plate to the border of the door.

How To Remove Kwikset Deadbolt Cylinder

Cylinder lock deadbolts are relatively common in every household since they provide boosted protection for the home and the family members. The cylinder is that portion of the lock into which the cardinal is inserted to enter your house.

Only in that location are several reasons you may have to remove the deadbolt cylinder. It is possible that the cylinder door lock is broken or yous've misplaced the keys, or the key is non inbound the keyhole properly.

Hush away all your worries as I accept stated every aspect you should know well-nigh how to remove the Kwikset deadbolt cylinder.

Things You lot Volition Need

The below-listed items are needed to remove the Kwikset deadbolt cylinder. Usually, people practise have these tools in their toolbox, merely if you lot exercise non have any, buy them either online or from the nearest hardware store

• A Flathead screwdriver
• A Plug-removal tool
• A Plug follower

Step-by-step Instructions

• Start the process by removing the ii screws on the inner side of the deadbolt lock face; doing this deadbolt will loosen from both sides of the door.
• With the lock'due south interior facing yous, hold the cylinder side of the lock in your manus.
• Now, with the assist of a flathead screwdriver or a plug-removal tool, remove the clip on the side of the plug. Every bit you move the clip from side to side, it volition detach from the plug.
• Now, insert the lock's key into the cylinder and turn the primal ¼-turn clockwise.
• Insert a plug follower on the cylinder'southward terminate and slowly pull the cylinder out of the lock with the aid of a plug follower.
  (A plug follower is a tube with the aforementioned diameter as the cylinder you're attempting to remove from the lock.)

How To Remove A Broken Key From A Kwikset Deadbolt

Things You Volition Demand

• A lubricant – As a penetrating lubricant, WD-forty can be used.
• A needle-nose plier- When dealing with tiny and narrow places like a keyhole, an 8-inch needle-olfactory organ plier is a perfect tool.

Stride-by-stride Instructions

• Start by applying a penetrating lubricant inside the keyhole earlier removing the damaged key from the lock. It volition aid in loosening the locking mechanism, especially if your lock is jammed.
• Now, check if the lock is in a vertical position. It needs to be aligned for you to remove the central. If not, you'll need to rotate the lock's cylinder vertically or horizontally.
• Use a flat caput screwdriver and carefully spin the lock dorsum into its original position, To make extracting a damaged primal from a lock simpler.
• Insert a pair of needle-olfactory organ pliers into the keyhole after the lock is in the proper position.
• Slowly achieve for the key's fractured section, careful non to press it any farther. Pull it out of the lock with a firm grip on its tip.

How To Remove Kwikset Deadbolt Without Screws

Are y'all struggling to figure out how to remove Kwikset deadbolt without screws? Don't worry, my friend, I am here to help you.

First, let us discuss where the screws are located that keep the lock intact. The mounting screws are located under the cover plate or base plate. The embrace plate helps enhance the dazzler of our business firm and boost security as even the burglar volition as well not be able to figure out where the screws are located.

Things You Volition Need

Earlier following the instructions beneath, ensure you lot have all the tools for the Kwikset deadbolt removal without the screws. You might take everything you need in your toolbox, merely if yous don't then these would exist easily available at your nearest hardware store.

1) A flat head screwdriver
It is used to remove the faceplate or cover plate of the deadbolt. You lot tin can use a 3/32 by ane ½- inch head screwdriver to consummate the task.

2) A Phillips head screwdriver
You lot'll likewise demand a Phillips head screwdriver because most deadbolt mounting screws are Philips-head screws. While using a screwdriver, ensure information technology's the proper size. There are five sizes of Phillips head screwdrivers, ranging from 0 to 4.

three) Sharp-edged or pointed awl
Information technology is used by shoemakers and carpenters to punch holes in leather or wood past withstanding downward pressure. You lot tin use an awl with a bract width of 2.45 mm.

If you don't have an awl, you lot can apply a metal paper clip.

Step by stride Instructions

• To open the deadbolt lock, stand within your dwelling and face the deadbolt lock in such a mode that the keyhole and the thumb-turner lock are visible to yous.
• Now, look for the picayune pin-hole on the shaft of the latch to remove the thumb-turner latch so that mounting screws can exist visible to you lot. To release the latch lever, insert your awl or paper clip into this pigsty and printing it down.
• Once you've finished removing the latch's lever, examine the plate's rim for a small notch. Remove the base plate with the aid of a apartment screwdriver. The mounting screws should be visible.
• Using your Philips screwdriver, carefully loosen the two visible mounting screws.
• Grab the lock with both easily from the inside and exterior of your abode, then pull them apart to remove them.
• In the end, to remove the entire latch mechanism from the hole. To do so, identify the two screws that secure the latch mechanism and remove them using the Philips screwdriver. When y'all're finished, remove the latch automobile from the hole.

How to Remove Kwikset Deadbolt Faceplate

A faceplate is the well-nigh important part of the lock, equally it protects the lock from wearable and tear. It is essential to acquire how to remove Kwikset deadbolt faceplate every bit you have to remove it while repairing the lock or lever to access the latch and mounting elements on the inside.

The removal technique varies significantly depending on the pattern and model, merely all varieties may be removed finer using common habitation tools.

At present, let us now read together how to remove Kwikset deadbolt faceplate in like shooting fish in a barrel and simple steps.

Things You lot Will Need

• A Philips and flathead screwdrivers
• An Allen wrench
• An Awl or nail

Step-by-step Instructions

• On both sides of the door, look for a single mounted screw on the lever shaft and the other two screws on the faceplate.
• Turn the shaft screw counterclockwise with a screwdriver to remove it.
• Now, try to pull the lever outward from the shaft to remove it.
• Now, turn the faceplate screws counterclockwise with a Philips screwdriver or hex wrench to remove them.
• Now, you may remove the faceplate by gripping and pulling it outwards.
• If you cannot remove the faceplate past manus, gently pry outward with a flathead screwdriver beneath the edge of the plate where it meets the door surface.

After learning how to remove a Kwikset deadbolt, at present let's learn about some of the common problems that you might face and some ideas most the lock maintenance.

Issues and Maintenance with Kwikset Deadbolt Locksets

If you're having problems with your Kwikset deadbolt lockset, you'll need to troubleshoot information technology first to figure out what'southward wrong. Kwikset deadbolt issues usually fall into one of the categories listed.

1) Gummy or difficult to lock Deadbolt

If information technology's difficult to lock or unlock your Kwikset deadbolt lockset, likely, the bolt isn't sliding easily into the latch hole in the door frame. The bolt and the latch pigsty may not exist aligned properly for various reasons.

• The door hinges are loose – The screws that concord the hinges to the door and the door frame may loose as your door ages and is used. Loose hinges allow the door to slide around the frame, causing the latch and lock to become misaligned.

• The deadbolt mechanism in the door may exist loose – As you lot lock and unlock the door, the mounting screws in the deadbolt lock may get free. Make sure the ii screws holding the lockset to the door are secure, and the commodities is aligned with the latch hole on the door frame.

• Issues with the latch mechanism — Although unusual, the latch mechanism might crusade the deadbolt to stick or hang. Make that all of the elements inside the lockset are aligned and that the mounting screws are secure. A pocket-size bit of silicone lubrication applied to the interior working components could assist.

2) Keys are difficult to insert or remove

Keys for Kwikset deadbolt locksets might get difficult to insert or remove at times. Dust and dirt enter inside the lock'south cylinder, making it difficult to insert or remove keys.

Putting a niggling amount of graphite into the keyway to lubricate the pins and other mechanism inside the lock cylinder usually solves the problem. Under no situation, you should use oil or an oil-based lubricant in the lock cylinder.

three) Problem with Kwikset SmartCode deadbolt

Kwikset Smartkey deadbolts allow you to rekey a lock without removing or replacing the cylinder.

These Smartkey deadbolts are vulnerable to the aforementioned issues every bit ordinary deadbolts and should be treated as such.
However, if the problem is with the lock mechanism or the lock cylinder itself, I recommend consulting a professional locksmith. If yous don't want to pay a locksmith then I suggest you acquire how to remove Kwikset SmartCode deadbolt.

FAQs

Q1. How to Remove Kwikset 2-Sided Primal Deadbolts?

Reply – The steps to Remove Kwikset Two-Sided Key Deadbolts are-

• Starting time by unscrewing the two screws that attach the internal lock to the mounting plate. (The screws are situated on the door lock'south inside side.)
• Now, remove the two mounting screws from the mounting plate on the internal side of the door while holding the outside side of the deadbolt.
• The mounting plate and the remaining one-half of the deadbolt will exist released subsequently the screws are removed.
• At present to remove the exterior lock from the striker or deadbolt assembly, pull information technology out.
• Unscrew the two screws that concord the striker associates to the edge of the door. To remove the striker assembly, pull it out and away from the door.
• Remove the two mounting screws from the striker plate attached to the doorjamb using a screwdriver.

Q2. How to Rekey a Kwikset deadbolt lock?

Answer- The steps to rekey a Kwikset deadbolt lock-

• Using a Phillips screwdriver, unscrew the two screws from the thumb-turn side of the lock assembly.
• Now remove the cylinder from the lock assembly.
• Using tweezers or pliers, remove the retaining prune from the rear of the cylinder assembly.
• At present, remove the tail from the assembly.
• Using a Flathead screwdriver, remove the bound cover while the cylinder is upright.
• Now, using tweezers or pliers, remove the tiptop pins. To avert the bottom pins falling out, remove the plug from the cylinder assembly in an upright position.
• Now remove the bottom pins of the plug. Turning the plug over and pouring them out is a elementary process.
• In the plug, insert the new keys.
• Insert the bottom pins into the pivot holes until the new pin'south top meets the shear line.

Q3. What is the procedure for removing a Kwikset door handle?

Respond – The process for removing a Kwikset door handle is-

• Remove the outer ring past loosening it and try to find the dip or lip around the outer ring's circumference.
• Hold the knob handles on both sides of the door and spin them both clockwise at the aforementioned time. Let go of the handles.
• Now, remove both the screws on the interior of the knob mechanism and loosen them.
• In the end, remove the latch from the side of the door and unscrew it.

Conclusion

I promise yous all along with my friend must have found this article on how to remove a Kwikset deadbolt useful. If y'all always get stuck in a situation where you lot have to remove a Kwikset deadbolt out of the door frame, you tin can follow the steps given above and salvage some penny for yourself.

Please comment on your thoughts and experiences, and issues you faced while removing the Kwikset deadbolt from the door frame.

I have been a security guy throughout my life. For the terminal thirty years, I have been making homes safer and hence, putting people at ease. Even on the other side of age, I get fascinated by how technology and simple hacks can brand a whole lot of divergence to the overall security of the house.

Source: https://bringuptodate.com/how-to-remove-a-kwikset-deadbolt/

Share this post